Centurion D5 DC Sliding Gate Operator

Well proven workhorse for majority of domestic sliding gate installations up to 500kg and a secure option for light industrial applications.

The D5 Sliding Gate Operator without it's cover

Technical Data , What Kits Are Available?, Packing Details

The thoroughbred range of DC operators offer swift and reliable sliding gate control. The D5 unit is powered by a high torque DC motor coupled to a custom built gearbox.

The system uses a 12V maintenance free battery as the primary power source. The battery is charged via a mains supply or solar panel. For light industrial applications the D5 is available with a power pack which delivers the full current requirement of the motor.

The principle features of the system are:

CUSTOM BUILT GEARBOX - made from advanced engineering materials for corrosion-free strength and durability.
ROBUST LUBRICATED GEARSET - ensures extended life and secure locking.
REVOLUTIONARY INTERNAL LIMIT SWITCH (DOSS) - for pin point stopping and easy installation. Novel gate referenced origin ensures that the end limit positions are never lost even if the gate is accidentally knocked off its rail and repositioned differently.
SENSITIVE ANTI CRUSHING CONTROL - for greater safety.
PROVEN SURGE AND LIGHTNING PROTECTION - for added reliability.
INTERNAL MANUAL RELEASE - with lockable access door for greater security.
UNINTERRUPTED OPERATION - using safe low voltage battery driven DC motor.
FAST OPERATING SPEED - offers greater security and convenience with smooth acceleration and deceleration.
MULTIPLE FEATURES - to suit a wide variety of applications.

At the core of the CENTURION slider is the electronic controller. The controller used in the D5 unit is the CP80 Controller.

Technical Data	Motor Voltage	12V DC
	Starting Thrust	60kgF
	Rated Thrust	20kgF
	Operating speed at rated thrust	16m/min
	Gate usage	See Table Below
	Anti-crushing sensing	Electronic only
	Maximum Gate mass	500kg

Gate Usage		Operations Per Hour	Operations Per Day	Operations in event of power failure
	Battery driven with SM2A charger and 7A/H battery1	20	150	±103
	Battery driven with SM2A charger and separate 40A/H battery2	20	150	±1003
	Power pack driven excluding battery back-up	20	100	0
	Power pack driven with 7A/H† or 40A/H2 battery back-up	20	100	Subject to capacity of standby battery fitted

1 - Mounted inside operator
2 - Must be housed separately in weatherproof enclosure
3 - Subject to length and loading of gate and assumes a fully charged battery before power failure.

At the core of the CENTURION slider is the electronic controller. The controller used in the D5 unit is the CP80 Controller.

What kits are available?

The D5 is available in different kits depending on the type of application. These are the standard domestic kits where a 220V mains supply is installed directly to the gate to power the charger unit and pillar lights.

The D5 is available with a fully rated power supply for light industrial applications. The standard light industrial kit is supplied without a battery where the standard domestic size battery is replaced by the power supply (PSU1). Where battery back up is required a separately mounted battery is supplied. The capacity of the battery is selected according to the power failure autonomy required.

The D5 Sliding gate operator is available with either rack or chain drive.

Packing Details (standard kits only)

The D5 Sliding Gate Operator Packing Details #1

Should you require further information regarding this product, please contact us.

Web Site Designed and Created by Alan Culpitt Web Design

Centurion D5 DC Sliding Gate Operator

Technical Data

Gate Usage

What kits are available?

Packing Details (standard kits only)